The On Time Performance Pedal Is A
Clock/ Timer/ Stopwatch Pedal Designed To Keep You On TIME.
Performance features two bright LED displays screens. The top LED display always shows the time of day, while the bottom LED can display a countdown timer, finish time timer, or stopwatch.
The Perfomance pedal comes in two different models; The "ST" which is controlled with two soft-touch foot switches, and the "T1" which has two arcade-style thumb switches.
The Performance-ST model is ideally suited for muscians, where a hands - free operation is essential. The Performance-T1 model has many applications from in the classroom, to the the board room. Both versions have the identical features.
The top LED display always shows the current time of time of day.
Users can program their setlist time with the Countdown timer. If your band has a 45 minute time slot, you would program 45 minutes as the Countdown value. Users can program the Countdown time well ahead of their shows. When it is time to perform, a simple tap of the right footswitch will start the countdown timer in the bottom LED display. If your set is interrupted and you need to pause the Countdown timer, a quick tap of the right footswitch will pause the countdown. To restart the countdown timer, another single tap of the right footswitch will start things up again. From one interface you can see both the current time of day, and the amount of time that you have left in your set.
How about a heads up if you are nearing the end of your set? Countdown has a Warning function that can be enabled. You can program a heads up – warning time at any interval. An example is that you have programmed a 45 Countdown time (your setlist), and programmed a 5 minute Warning. When the countdown value hits 5 minutes, the bottom display will start to flash as a visual heads up.
Finish Time is the second countdown timer function of the pedal. Finish Time calculates a countdown time based off of a firm end time that you program. The first step is to program your Finish Time. When you are ready to start your set, the pedal makes a calculation based off of the current time and starts a countdown timer based off of your programmed end time.
For example, your band needs to be done at 9:30. You would program 9:30 in as your Finish Time prior to starting your gig. You are supposed to start playing at 8:30, but for some reason you don’t start playing until 8:38. When you start your set you depress the right footswitch and the pedal makes quick calculation and starts a 52 minute countdown timer.
A single tap of the right footswitch will pause the Finish Time countdown. To restart the timer, you would single tap the right footswitch again. Since the Finish Time timer is based on a firm end time, the pedal would do a fast catch up to the actual time left in your set - based on the current time.Like in Countdown Timer, the Warning (heads up) flashing function, can be enabled at any time interval when using the Finish Time countdown.
The Performance pedal is encased in a powder coated die cast aluminum enclosure with two bright LED displays. The enclose measures 4.67" x 3.68" x 1.18".
Bright LED Display
The LED displays on the pedal are bright. They are designed to be seen in daylight or on dark stages. Too bright? a single tap of the left foot switch will dim the LED displays.
Performance utilizes an internal 9V battery. The preferred power source is an external DC power supply. The DC power requirements are a standard regulated 9-volt DC power supply with a negative center 2.1mm barrel. Current draw is around PLEASE ADVISE ON MEGA AMPS DRAW XXma. r wording.
On Time Pedals - Performance
Picture of the version
with thumb butons